Please note!
The pictures shown as below are new, if you would like a used same model for cheaper price, please contact us for details!
Product Description
Popular Heavy Duty Dongfeng Tianlong 25000KG Compactor Garbage Truck Efficient Waste Disposal Large Diesel Compression Special Vehicle Best Quality 5250
ZBH5250ZYSDFE6 compressed rubbish truck is a new generation of rear-mounted compressed rubbish truck independently developed and designed by Changsha Zoomlion Environmental Industry Co. The vehicle adopts Dongfeng Tianlong II chassis and is modified by adding rubbish bin, filler, push shovel, feeding mechanism, filler cover, hydraulic system, pneumatic system, electrical system and other components.
The vehicle has high operating efficiency, simple and beautiful appearance, excellent performance, and user-friendly control and operation mode. It adopts two-way compression technology to complete the collection and transfer of urban living rubbish, with large loading capacity, and its comprehensive performance reaches the leading level of similar products in China.
The core components such as hydraulic and electric components are of high quality and have high operational stability. In addition, it can be equipped with a variety of feeding mechanisms: 120L/240/660L plastic drum turning mechanism, 120L/240L plastic drum turning mechanism, iron drum (bucket) turning mechanism, bucket turning mechanism, bucket lifting mechanism and lid turning mechanism.
Function Overview
It has various functions such as rubbish collection, automatic rubbish loading and compaction, loose rubbish compression, rubbish transfer and dumping.
Scope of application
It is mainly applicable to the collection and transport of barrels, bags and bulk household rubbish in urban residential areas, communities, large-scale factories, mines and institutions.
This product is not applicable to the collection and transfer of construction waste, industrial waste, kitchen waste and round wood waste.
Product Parameters
| Item |
Unit |
Parameter |
| Vehicle Parameters |
Vehicle mass |
kg |
15100 (Basic) |
| 15350 (Tipping bucket type) |
| 15500 (Lift Bucket Type) |
| 15500 (Tipping bucket type) |
| 15500 (Lift Bucket Type) |
| 15500 (Lid tipping bucket type) |
| 15800 (Tipping bucket type distributor power system) |
| Maximum Gross Mass |
kg |
25000 |
| Rated load mass |
kg |
9770/9705 (Basic model) |
| 9520/9455 (Tipping bucket type) |
| 9370/9305 (Lift bucket type) |
| 9370/9305 (Tipping bucket type) |
| 9370/9305 (Bucket Tipping) |
| 9370/9305 (Lid tipping bucket type) |
| 9070/9005 (Tipping bucket type distributor power system) |
| Overall dimensions (length) |
mm |
10190 (Basic type) |
| 10520 (Bucket Tipping Type) |
| 10160 (Bucket Lift Type) |
| 10165 (Tipping Bucket Type) |
| 10438 (Tipping Drum Lift Bucket Type) |
| 10328 (Lid Tipping Bucket Type) |
| 10165 (Bucket Tipping Type Distributor Power System) |
| Overall dimensions (width) |
mm |
2540 |
| Overall dimensions (height) |
mm |
2540 3470 |
| Wheelbase |
mm |
4350+1350 |
| Minimum Ground Clearance |
mm |
240 |
| Approach/Departure Angle |
° |
20/13 |
| Remarks |
|
| Chassis parameters |
Chassis model, category, manufacturer |
Dongfeng Tianlong Class II Chassis DFH1250D4 |
| Number of passengers |
2,3 persons |
| Engine model, manufacturer |
D6.7NS6B290, Dongfeng Cummins |
| Rated engine output |
213kw/2300 r/min |
| Transmission model |
9JS119TA |
| Transmission type |
Manual gear |
| Operation Performance |
Effective volume of dumpster |
m3 |
20.5 |
| Filling hopper volume |
m3 |
2.4 |
| Cycle time for press-fill operation |
s |
≤24 |
| Cycle time of loading operation |
s |
≤10(Bucket Tipping Type) |
| Unloading cycle time |
s |
≤55 |
| Control mode |
/ |
Automatic, manual |
| Driving performance |
Maximum speed (full load) |
km/h |
89 |
|
| Maximum gradient |
% |
30 |
| Minimum turning diameter |
m |
16 |
Detailed Photos
The main advantages of the product
Strong corrosion and abrasion resistance The structure of the main parts of the bin and filler in contact with rubbish is made of high-strength weather-resistant steel or abrasion-resistant steel, with outstanding overall structural performance, strong corrosion and abrasion resistance.
Beautiful moulding and reliable structure of dumpster The dumpster has a rectangular frame in transverse section and a trapezoidal frame in longitudinal section, and the two sides, bottom and top surfaces are designed in circular arc moulding, which makes the whole machine beautiful and generous in moulding, and the overall structure is of high strength and high rigidity.
Strong loading capacity and high operating efficiency Adopting advanced two-way compression technology with high compression ratio, which is the leading position in the industry. Short loading time, one cycle time for loading operation is less than 24 seconds, one cycle time for unloading operation is less than 55 seconds, and the hopper volume of filler is 2.4 m³. The curved scraper scraping surface of the filling mechanism adopts the unique design of S-type curved surface, which is composed of two curved surfaces. When the scraper scraping action is performed, the two arcs generate compression force perpendicular to the tangent plane normal direction, which can realise the pre-pressure effect on the loose rubbish in the hopper of the filler, and improve the efficiency of the compaction and filling operation. The process of rubbish collection and transport is efficient and fast, which is the leading position in the industry.
Advanced control technology Different from the traditional PLC control mode commonly used in the domestic industry, the product adopts the most advanced 'CAN bus + special controller mode' in the control mode, which has a high degree of automation, good reliability, low failure rate and long service life. Engine power output control through the electrical system to achieve fully automatic control, to ensure that the rubbish truck in its various operating conditions, the engine can automatically achieve acceleration and idling state, to avoid power loss and system heating, low fuel consumption, good economy.
Hydraulic and electric integrated cylinder technology The scraper cylinder and skateboard cylinder can be equipped with built-in high-pressure proximity switch, i.e. the proximity switch element and the cylinder can be combined into one, this technology can realise the precise control of the action of the pressure filling mechanism, which can significantly enhance the high reliability and accuracy of the control logic of the product. At the same time, the hydraulic cylinder has little hydraulic shock and low operating noise.
Sealed treatment eliminates secondary pollution The waste is in a closed state during compression, filling and transport. A double rubber seal is used at the joint surface between the filler and the bin, and a sewage deflector is installed at the seal to ensure that sewage does not drip or spray during collection and transport (double sealing technology). The filler lid completely covers the filler feed opening to eliminate dust and debris from the rear of the vehicle during transit and to reduce odour pollution.
In order to ensure the sealing of the rear face of the bin and prevent sewage from flowing out, an innovative design of independent locking hooks is used to lock the filler, and the sealing strips at the combined face of the rear face of the bin and the filler are always kept in compressed state, which ensures a good sealing of the combined face of the filler and the bin and prevents sewage from dripping and leaking and causing secondary pollution. (Independent locking mechanism)
High safety: there is an anti-descent switch on the side of the dustbin to prevent the filler from falling and threatening people's safety after it has been lifted by misoperation; the product is equipped with an alarm device, which can alarm the operator to prompt him/her to be prudent in the operation when it involves safety; the advanced hydraulic lifting safety circuit ensures that the filler won't fall suddenly and cause a bad accident even if the hydraulic pipe bursts in the process of the filler's lifting; there is a safety support bar on the dustbin to avoid the waste water dripping and the secondary pollution. There is a safety brace on the dustbin to prevent the filler from falling down and injuring people; the product is labelled with safety signs to guide the operator to operate safely.
Vehicle-to-vehicle' docking and transfer The lid of the filler adopts the cylinder-driven folding form, and the optimised design of the barrel rack arrangement of the loading mechanism enables docking and transfer with rear-mounted ZZZ series transfer vehicles.
High adaptability Users can choose different tipping bucket (bucket) mechanisms according to different rubbish collection methods: tipping standard rubbish iron bucket ZBT59003-88 (300 L), plastic rubbish bin (120L, 240L, 660L, 1100L), small rubbish bucket with truck (800 litres), tipping bucket mechanism (1400L) and lifting bucket mechanism (3365L).
User-friendly operation control The operation control box is installed in the driver's cab and the rear of the vehicle respectively, the operation control box in the driver's cab can control the pushing and unloading of materials and select the operation mode, while the operation control box in the rear of the vehicle can control the operation of the press-filling mechanism and the bucket-carrying mechanism, which is very convenient to use and operate, especially in the landfill site, where the operator can complete the unloading of materials without getting off the vehicle.
High-quality electric and hydraulic components The product adopts air-controlled multi-way reversing valve, which has a simple valve structure and low maintenance and repair costs. At the same time, make full use of the characteristics of the multi-way directional valve resistant to oil and liquid pollution, eliminating the phenomenon of valve jamming, improve the reliability and efficiency.
FAQ
1. Q: How about the quality of your trucks?
A: Wuhan Ring Valley Environment mainly sells medium and high-end sanitation trucks, no matter the chassis, engine and so on are all belong to the top equipment. Our trucks get ISO 9001: 2008 and CCC, B&V and other related certificates.
2. Q: Is there any advantages of your price?
A: We don't only have new truck but a large selection of used trucks. Different products in different years are available at different prices. We'll be sure to help you find the best vehicle in suitable price.
3. Price term: FOB, CIF.
4. Payment: 30% deposit after order confirmation, 70% balance should be paid before delivery. All are by T/T, L/C.
5. Delivery time: 7-20 working days after payment is received.
6. Standard Steering: Left-hand drive, if you need Right-hand drives, please inform us, we will make special order for you.
If you have any other questions, please feel free to contact us at any time.
){kind=link}