Pay Attention please!
Our company mainly sells used sanitation trucks! Different prices for different years! Please contact us for details!
Product Description
SAIC Maxus Small Sanitation Pure Electric Road Cleaning and Sweeping Vehicle High Pressure and Low Flow 5040 Electric Sweep Truck
ZBH5040TXSSHBEV pure electric cleaning vehicle is a new generation of small sanitation machinery products developed by our company, which is modified by SH1047ZFEVNZ8 type II truck pure electric chassis of SAIC Maxus Automobile Co., LTD. The chassis and the top are powered by batteries, and the road is cleaned with high pressure and low flow of high pressure water, and the sewage and garbage on the road are sucked back into the car garbage bin through the fan.
SAIC Maxus Small Sanitation Pure Electric Road Cleaning and Sweeping Vehicle High Pressure and Low Flow Electric Sweep Truck 5040has various functions, beautiful appearance, high efficiency, environmental protection and reliability.
Product Parameters
Main technical parameters of the product
| Item |
Parameters |
| Total mass kg |
4250 |
| Maximum gross mass kg |
4495 |
| Rated load mass kg |
115 |
| Overall dimensions(L×W×H)mm |
5970×1796×2380 |
| Minimum turning diameter m |
14 |
| Maximum gradient % |
30 |
| Maximum speed km/h |
90 |
| Chassis motor |
Type |
permanent magnet synchronous motor |
|
| Model |
TZ220XSA03 |
| Manufacturer |
JingJin Electric Technology Co. |
| Motor rated power/speed/torque |
60/3800/150 |
| (kW/r/min/N.m) |
| Motor peak power/speed/torque |
120/12000/320 |
| (kW/r/min/N.m) |
| Fan motors |
Model |
TZ205XSA0345A |
|
| Type |
permanent magnet synchronous motor |
| Manufacturer |
Shenzhen Xist New Energy Technology Co. |
| Rated power / speed |
20 kW /2900 r/min |
| Dual pump motors |
Model |
TZ210-15-01 |
|
| Type |
permanent magnet synchronous motor |
| Manufacturer |
Hunan Huichuan Electronic Technology Co. |
| Rated Power / Speed |
15 kW /2000 r/min |
| Top-mounted controllers |
Model |
SICU12-B140SA-ZL01 |
|
| Specification |
550VDC/24VDC/40kW+15kW |
| Manufacturer |
Shenzhen Xist New Energy Technology Co. |
| Chassis Battery |
Model |
L173TB1,L173TB2 |
|
| Type |
lithium iron phosphate battery |
| Manufacturer |
Ningde Times New Energy Technology Co. |
| Nominal voltage (V) |
566.72 |
| Nominal Capacity (Ah) |
173 |
| Total power storage (kWh |
98.04 |
| Battery Energy Density( w.h/kg) |
154.59(L173TB1),153.84(L173TB2) |
| High Pressure Water Pumps |
Rated pressure MPa |
15 |
|
| Rated flow rate L/min |
70 |
| Maximum sweeping width m |
2.5 |
| Operating speed km/h |
3~20 |
| Maximum working capacity(m2/h) |
50000 |
| Water tank volume m3 |
2 |
| Dumpster volume m3 |
2.1 |
| Dumpster discharge angle ° |
45 |
Function Overview
1. can be the road cleaning, cleaning, cleaning;
2. can clean the curb, curb facade;
3. Road signs and billboards can be cleaned (high-pressure spray gun);
4. barrier cleaning (top boom);
5. optional spot cleaning before installation (need to remove the plate and annual inspection), front corner spray cleaning (and the former spot cleaning can only choose one, need to remove the plate and annual inspection), maintenance cart function;
6. standard vehicle terminal, video surveillance system, optional tachograph function.
Scope of application
Suitable for small streets, urban roads, squares, airports, wharves, tunnels, Bridges, isolation walls, curbs and curb facades mechanized cleaning, dust cleaning and other cleaning operations, among which, the barrier cleaning function is especially suitable for side roads, sidewalks and other areas away from the carriageway cleaning operations.
Detailed Photos
Main advantages of the product
1. Chassis
The chassis. SH1047ZFEVNZ8 pure electric second class chassis modified by SAIC Maxus Automobile Co., LTD. The chassis has low-speed cruise function, the minimum speed is < 4km/h, the cab can be turned over, easy maintenance, is the most advanced and reliable quality of pure electric second class cargo chassis in China.
Chassis motor. TZ220XSA03 permanent magnet synchronous motor from Jingjin Electric Technology Co., Ltd. is used for direct drive, high efficiency and energy saving, with rated power/speed/torque of 60 kW /3800rpm/150 N.m.
Chassis battery. Using the original battery pack (cell and battery management) produced by Ningde Times New Energy Technology Co., LTD., power 98.04kw.h, energy density 154.59 w.h/kg (L173TB1) /153.84 w.h/kg (L173TB2). Battery protection level IP68, in the domestic advanced level.
Chassis electrical control. Adopt KTZ54X32S2601 controller produced by Suzhou Huichuan United Power System Co., LTD., integrated design, multi-in-one controller, compared with single machine, reduce volume 30%, weight 32%; High voltage connection points are reduced to 13, effectively improving safety. The controller protection level reaches IP68, EMC with load Class 3, variable carrier frequency, overmodulation, intelligent feedback, junction temperature estimation and other design, to ensure high reliability of products.
2. Clean the system
The cleaning system of the washing and sweeping car adopts the technical structure of "two vertical sweeps in the middle + high pressure water spray rod built in the middle wide suction nozzle + high pressure side spray rod", and integrates the left and right spray rod with the suction nozzle. The structure is advanced:
1) The maximum operating capacity is 50,000 m2/h, and the cleaning operation can meet the 95% cleanliness rate of cement pavement, wash evenly, no traces of sewage residue, and effectively wash the garbage in the cracks of cement and asphalt pavement to restore the road color once.
2) Adopted the national patent cleaning and sweeping car dual-purpose sweep plate (patent No. 200820052391.1), with collision avoidance function (patent structure, patent No. 00224174.9). When an obstacle is encountered, the dust cover can shrink inward to avoid the obstacle and automatically return to the normal working position after crossing the obstacle.
3) The left and right high-pressure side spray rod and suction nozzle form a "V" type arrangement, and can adjust the "V" shape Angle and the high-pressure water nozzle Angle, the water flow impact force is large, can collect sewage efficiently, and the spray rod has the anti-collision and automatic reset function.
4) The high-pressure spray rod is fixed with a pipe clamp, which is reliable and not easy to loose. The spray rod is installed on the baffle plate with a waist hole, and the nozzle water curtain flushes the ground from the corresponding waist hole. The baffle plate can effectively prevent sewage splashing, and the suction nozzle has a small range of floating function, which can be leveling with the ground and has good working condition adaptability.
5) The total width of the suction nozzle is up to 1750mm, and the suction width is up to 1500mm, which is almost equal to the width of the car, improving the work efficiency and operation cleanliness. Through CFD flow field analysis, the suction nozzle can effectively improve the garbage pickup efficiency;
6) Large suction tube, pipe diameter 160mm, can absorb large particles of garbage, not easy to plug the tube.
3. High-pressure water system
High pressure waterway system is mainly composed of water filter, high pressure pump, air control water valve group, high pressure reel, hand-held spray gun, pipe, etc., with road flushing, box self-cleaning, hand-held spray gun washing and other functions. The main features are as follows:
1) The high pressure waterway control system adopts the advanced technology of the integral air control water valve group, through the solenoid valve to control the opening and closing of the high pressure ball valve, compared with the electric ball valve, more reliable, less failure rate, environmental protection and energy saving;
2) High pressure pump adopts international famous brand high pressure piston pump, rated working pressure of 15MPa, rated flow rate of 70L/min, high efficiency and good reliability;
3) The high-pressure waterway system is provided with multiple protection of unloading valves and safety valves. The unloading valve ensures the protection of the system when the operation stops. The safety valve plays a safety role to avoid pressure sudden failure; The water valve group is equipped with a pressure gauge to monitor the water pressure and prevent the water pressure from being too high, which may bring unnecessary safety risks.
4) The water inlet is equipped with a filter before entering the high pressure pump to avoid impurities in the water into the high pressure pump, greatly extending the life of the pump;
5) The high pressure cleaning reel is 15 meters automatic winding, and the reel retracting and retracting has automatic recovery function.
4. Dust removal system
The combination device of "low pressure dust removal nozzle + stainless steel pipeline anti-collision support" is adopted to spray dust removal effect, and avoid the sweep plate being worn by road teeth. Generally used in the road sweeping working mode, it can effectively reduce the dust stirred up in the road sweeping operation and improve the working efficiency.
5. Box
Excellent overall performance and reliable quality. Through the sealing test, ensure that the rear door has good sealing and prevent potential water leakage. The garbage can effectively separate the sewage and silt, discharge the sewage separately at any time according to the sewage situation in the garbage box, reduce the number of dumping garbage, effectively extend the continuous working time of the washing and sweeping truck, and improve the working efficiency.
1) Reasonable structural design: the box is an integral structure of "garbage bin + clear water tank", with compact structure and high space utilization rate. The side plate and bottom plate of the box adopt corrugated structure, the internal surface is smooth, high strength, rust and corrosion prevention, and good waterproof impact performance. The volume of the clean water tank and the sewage tank are reasonably matched, the volume of the clean water tank is 2m³, the volume of the sewage tank is 2.1m3, the volume parameter is leading, and the operation time is effectively extended.
2) Lightweight design: The waste box is welded with stainless steel plate, and the corrugated plate structure with mature technology is adopted, which not only meets the structural strength of the box, but also realizes the lightweight design.
3) Humanized design:
The interior is provided with a filter screen, which can effectively prevent leaves, plastic bags and other light blockage of the tuyere;
The top air duct can avoid sewage backfilling; There is a sink on the lower side of the discharge port at the rear door of the box to avoid splashing of sewage during discharge;
The rear door of the box adopts the cylinder + latch type locking mechanism, with the foam rubber sealing strip to prevent sewage leakage; The rear door seal is equipped with a screw adjusting sealing device, reliable sealing and easy maintenance.
the water tank is set with a low water level sensor, and there is a voice alarm in the cab to remind the water level;
The rear door is equipped with two circular observation holes and a discharge butterfly valve, which can observe the sewage level of the sewage tank in real time through the observation window, and release sewage to the roadside sewer through the discharge butterfly valve to avoid frequent trips to the garbage dump;
The dustbin has the automatic tipping unloading function, the unloading Angle is 45°, and the high-pressure self-cleaning device is installed inside, which can quickly wash the dustbin.
6. Install the motor and its transmission device
The top operation is driven by double motors, the fan motor and the pump motor work independently, and the air volume and water volume can be adjusted in real time according to different working environments to ensure the best working effect.
Fan motor. TZ205XSA0345A motor of Shenzhen Xizest New Energy Technology Co., LTD., rated speed 2900rpm, rated power 20kW. The motor output shaft is connected with the fan impeller through a coupling.
Double pump motor. TZ210-15-01 motor of Hunan Huichuan Electronic Technology Co., Ltd. is used to drive the hydraulic oil pump and high pressure water pump through the belt drive. When the rated speed is 2000rpm, the rated power is 15kW.
Electromagnetic clutch. The high-pressure water pump is equipped with an electromagnetic clutch, which is automatically controlled by the electronic control system to realize the separation and engagement of the clutch, without manual operation.
7. Fan
The 9-26 series special centrifugal fan is used, which has the characteristics of high efficiency, low noise, flat performance curve, wide efficiency area, etc. It is one of the important accessories for Zhongunited brand small road sweepers for a long time, with mature technology and reliable work. The air outlet of the fan is equipped with a double air duct muffler, and all sides of the wind engine room are affixed with high-quality high-density fire and sound insulation environmental sound absorbing cotton, which can effectively reduce operating noise.
8. Guardrail
The side fence beams are made of high quality aluminum alloy profiles, which meet the national mandatory requirements standards, beautiful appearance and generous. The side guardrail installation seat is a turning mechanism, which is convenient for the maintenance of the rear air pump, gas storage tank and other components.
9. Swing your arms
The vehicle has the function of obstacle clearing, and the top of the trash can is installed with a horizontal swing arm, which is mainly made of light aluminum alloy material.
The swing arm is 2.5m long and 2.3m above the ground. The swing arm can rotate 80° to the left and right sides of the vehicle, and the working coverage width of the swing arm is 4.8m. The swing arm has a built-in telescopic tube, which can be extended 1.2m, and the working coverage span of the swing arm after extension is 7m. The high-pressure hose is arranged along the swing arm, and can be extracted and recovered along the swing arm, and can be rotated along the swing arm to achieve obstacle cleaning and low-speed following operation, which is convenient for remote washing operation away from the driving area.
10. Hydraulic system
Hydraulic valve blocks and pipelines are arranged neatly.
With dustbin lifting cylinder anti-fall balancing valve block, safe and reliable.
The left front corner of the subframe is arranged with a manual pump, which can manually assist the lifting of the dustbin under special circumstances.
11. Electronic control system
The vehicle adopts the control mode of "display + controller +CAN bus operation panel". When the operation starts and stops, the motor speed control, the lifting of the nozzle, the sweeping disc retracting and retracting are all controlled by one key, which is easy to operate. Vehicle operation is realized by 3 operating devices, two of which are in the cab, integrated on the chassis operating platform, easy to operate, simple and beautiful cab; The other is located in the rear right side of the vehicle operation panel, convenient garbage disposal and commissioning maintenance.
The display screen. Integrated operation, the top operation is integrated on the HD touch display of the chassis. Located in the middle of the chassis instrument panel, it is mainly used for various vehicle cleaning operations, status monitoring, information query and chassis related applications.
The vehicle has a color video rear-view system. Cameras are mounted on the rear and right side of the vehicle, and high-definition color displays are installed in the cab. During operation, the cleaning effect can be checked and monitored in the cockpit. When reversing, the display automatically switches to the reversing image monitoring interface, which provides convenience for reversing driving.
There are several operation modes to choose from. The system has 12 operation modes: full sweep, left sweep, right sweep, full sweep, left sweep, right sweep, full wash, left wash, right wash, pure suction, dust drop, and post-spray (spray gun). The user can choose the appropriate operation mode according to the operation needs. After the operation mode is selected, the operation is started with one key, and all the institutions that need to participate in the operation will automatically extend and run the operation in the specified order. When it is necessary to stop the operation, one key stop, all the operating institutions in the work will automatically stop running in the prescribed order and recover to the original state.
The one-click pause function. In the process of operation, such as special conditions (such as waiting for traffic lights, etc.), one-click pause can be realized. The pause function starts, the nozzle stops spraying water, the sweep disk stops rotating, and the motor returns to idle speed; The suspension function ends, and the working state before suspension is resumed, that is, the nozzle continues to spray water, the sweep disk continues to rotate, and the motor speed is restored to the speed before suspension.
Voice alarm system. The voice alarm system equipped with this car can issue a variety of voice alarms and prompts during operation and unloading, such as "water tank outlet valve is closed, can not be cleaned", "sewage tank tipping over, please pay attention to safety" and other voice prompts, as well as a number of music prompts and roaring alarm information, etc., convenient and practical.
FAQ
1. Q: How about the quality of your trucks?
A: Wuhan Ring Valley Environment mainly sells medium and high-end sanitation trucks, no matter the chassis, engine and so on are all belong to the top equipment. Our trucks get ISO 9001: 2008 and CCC, B&V and other related certificates.
2. Q: Is there any advantages of your price?
A: We don't only have new truck but a large selection of used trucks. Different products in different years are available at different prices. We'll be sure to help you find the best vehicle in suitable price.
3. Price term: FOB, CIF.
4. Payment: 30% deposit after order confirmation, 70% balance should be paid before delivery. All are by T/T, L/C.
5. Delivery time: 7-20 working days after payment is received.
6. Standard Steering: Left-hand drive, if you need Right-hand drives, please inform us, we will make special order for you.
If you have any other questions, please feel free to contact us at any time.
){kind=link}