Please note!
The pictures shown as below are new, if you would like a used same model for cheaper price, please contact us for details!
Product Description
Used Diesel Foton Brock 8275kg Road Cleaning and Sweeping Vehicle Strong Power Midium Sweeper Vacuum Cleaner Truck 5084
BJ5084TXSE6-H1 type washing and sweeping car adopts Foton Omako Country VI class II car chassis as the base model, and is equipped with auxiliary engine, fan, high pressure water pump, cleaning water tank, dustbin, left and right vertical sweep, wide suction nozzle with spray rod, sweeping disc dust removal system, hydraulic system, special device electronic control system and auxiliary frame. The product is used as a road sweeper for road cleaning and suction operation, and can also be used as a combination of road cleaning and suction and high pressure flushing. To achieve a variety of combinations of cleaning, washing and cleaning to meet the needs of different users. It is suitable for the flushing, sweeping, cleaning and dust removal of the main road and viaduct in the city.
Function Overview
The car has a variety of functions such as road cleaning, road cleaning, curb and curb facade washing, spray dust removal and low pressure hedge cleaning. It can be used as a road sweeper, washing sweeper, curb cleaning vehicle, spray dust removal vehicle and low pressure sprinkler.
Scope of application
Suitable for urban roads, highways, squares, airports, wharves, tunnels, Bridges, isolation walls, curbs and curb facades mechanized cleaning, sweeping, spray dust removal and other cleaning operations.
Product Parameters
Main technical parameters of the product
| Item |
unit |
Parameters |
| product mark |
|
FOTON |
| Bulletin Model |
|
BJ5084TXSE6-H1 |
| GVW |
|
8T |
| |
Maximum Gross Mass |
kg |
8275 |
| Vehicle parameters |
| |
Vehicle Weight |
kg |
74,00 /7,600 |
| |
Rated load mass |
kg |
680,480 |
| |
Overall dimensions (L×W×H) |
mm |
6900×2200× (2570,2610) |
| |
Minimum Ground Clearance |
mm |
140 |
| |
Approach/Departure Angle |
° |
12-21 |
| |
Wheelbase |
mm |
3800 |
| Operational performance |
Maximum washing width (including kerb washing width) |
mm |
3175 |
|
| Maximum pressure of washing water |
MPa |
10 |
| Maximum flow rate of washing water |
L/min |
85 |
| Low-pressure washing width |
m |
- |
| Sweeping width |
m |
3.1 |
| Sweeping speed |
km/h |
3~20 |
| Maximum cleaning capacity |
square meters/h |
62000 |
| Discharge angle |
° |
≥45 |
| Driving performance |
Maximum speed (full load) |
km/h |
95 |
|
| Maximum Climbing Angle |
% |
30 |
| Braking distance (full load 30km/h) |
m |
≤10 |
| Minimum turning diameter |
16 |
| Full sweeping operation on level road surface, operating speed 7km/h |
Standard Operating Model |
L/h |
13.28 |
| |
L/10000square meters |
4.28 |
| 7km/h for full sweeping operation on levelled road surface |
Standard operating mode |
L/h |
11.18 |
| |
L/10000square meters |
3.61 |
| Upper Parameters |
Sub-starter |
Model |
YN25NAG4 |
|
| Power kw |
36.8 |
| Water tank volume |
L |
4.5 |
| Dustbin volume |
L |
4.1 |
| Chassis parameters |
Chassis model, manufacturer |
BJ1088VEJEA-FK, Type II, Eurocopter Omac |
|
| Number of persons loaded |
3 |
| Engine/ |
Manufacturer |
Foton Cummins, Kunming Yunnei |
|
|
| Model |
F3.8NS6B156,D30TCIF1 |
| Rated power/speed (kW/r/min): |
115kw/2600,125/2800 |
| optional |
state I |
High-pressure water pump Danon DBP-3225 |
Detailed Photos
Main advantages of the product
Competitive product lock: Similar products in the industry use Dongfeng chassis modification, product homogeneity is high. Through the technical parameter analysis and field measurement and market research, our Foton brand cleaning car mainly has the following advantages:
1. the industry's first use of secondary engine models: the use of cloud diesel engine, the engine is the current domestic cleaning car secondary engine emissions the most environmentally friendly engine, fuel consumption, low noise. The auxiliary engine with the vehicle clutch, starting and stopping, the cylinder drive clutch separation, delay after engagement, clutch separation and engagement, automatic control by the electronic control system, no manual operation.
2. the optimization of the airway flow field, less return dust, more powerful fan, more reliable suction nozzle:
Gas channel delay technology: Through the gas channel delay, to achieve the maximum gravity dust fall and inertial dust fall;
Suction nozzle improvement: The suction nozzle adopts the technology of reducing the cross section height to improve the flow field suction by 10-15%, and the floating nozzle technology to improve the reliable performance of the nozzle;
Fan blade improvement: The fan adopts unique blade molding design and noise reduction technology, which improves the performance by 10%-15% and reduces the noise by 5-10 dB; At the same time, the blade adopts special coating and high wear-resistant material, and the fan life is increased by 20%.
3. garbage bin: The use of thick 4mm single-layer stainless steel tile structure design, the collection of water tank and garbage bin in one. The design of tile structure not only makes the appearance novel, but also enhances the strength and stiffness of the bin and reduces its own weight. Dump the bin and discharge the material at a 45º Angle. Lock can rely on the dumpster rear door sealing mechanism, declared a national patent. The volume of garbage can reach 4.1m3, which realizes the volume ratio of one box of water and one box of sewage during operation.
4. Combined high-pressure cleaning spray rod: high-pressure cleaning spray rod consists of left and right spray rod and nozzle spray rod, attached to the nozzle or nozzle, the height of the spray rod is fixed from the ground during operation, and does not change with the load of the vehicle, which can achieve and stabilize the best cleaning effect. The left and right spray rods can swing out and be driven by the cylinder, and are automatically controlled by the electronic control system. When the left and right spray rods are placed at the same time, the cleaning width is not less than 3.1m, and when the unilateral spray rods are placed, the cleaning width is not less than 1.5m. In order to facilitate the adjustment, maintenance and replacement of the nozzle, the nozzle spray rod is designed to be quickly pulled out of the structure, and declared a national patent.
5. comprehensive optimization of the cleaning system, higher efficiency, longer life, optimal strength: CAE (computer aided engineering) optimized design of the cleaning mechanism.
All casting parts, the best strength: the sweep arm parts are all assembled by castings, which exceeds the competitive welded structure in mechanical strength, durability, reliability and aesthetics.
Sweep arm double cylinder design: the sweep arm adopts double cylinder adjustment design, which is more flexible and completely eliminates dead corners than the competition's oblique insert single cylinder design.
Structure optimization and lightweight design technology: ABS alloy is used to sweep the disc, which has the advantages of light weight, no rust, small vibration stress during operation, reduce joint fatigue, and improve service life.
6. the patented one-button operation intelligent electronic control system: when the operation starts and stops, the auxiliary engine speed control, the pneumatic gear clutch clutch, the suction nozzle lifting, the sweep disc retracting and retracting, the left and right spray rod retracting and other operating devices are all controlled by one key, easy to operate, greatly reducing the possibility of misoperation. The system has been declared a national patent.
7. patented technology of sub-engine speed control device: sub-engine speed has "strong wash" and "normal" two options. Before the operation starts, the auxiliary engine runs at idle speed, at which time you can select "normal" or "strong wash". Select "Normal", when the operation starts, the auxiliary engine speed will automatically slowly increase from idle speed and steady operation at 1800r/min. Select "Strong wash", the sub-engine speed will be stable at 2000r/min. Speed control accuracy up to ±50r/min, the device declared a national patent.
FAQ
1. Q: How about the quality of your trucks?
A: Wuhan Ring Valley Environment mainly sells medium and high-end sanitation trucks, no matter the chassis, engine and so on are all belong to the top equipment. Our trucks get ISO 9001: 2008 and CCC, B&V and other related certificates.
2. Q: Is there any advantages of your price?
A: We don't only have new truck but a large selection of used trucks. Different products in different years are available at different prices. We'll be sure to help you find the best vehicle in suitable price.
3. Price term: FOB, CIF.
4. Payment: 30% deposit after order confirmation, 70% balance should be paid before delivery. All are by T/T, L/C.
5. Delivery time: 7-20 working days after payment is received.
6. Standard Steering: Left-hand drive, if you need Right-hand drives, please inform us, we will make special order for you.
If you have any other questions, please feel free to contact us at any time.
){kind=link}